Home > Breathing Apparatus > Emergency Escape Smoke Hoods > Drager Parat 5510 Fire Escape Hood (single pack)

Drager Parat 5510 Fire Escape Hood (single pack)

Tag: Product Code: DR-R59415

Drager Parat 5510 Fire Escape Hood (single pack)

Tag:
Product Code:DR-R59415

£0.00

Drager Parat 5510 Smoke Hood Single Pack

The Drager Parat  fire escape hoods were developed in cooperation with users – always with the focus on offering the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested CO P2 filter guarantee that the wearer of the Dräger PARAT® 5500 is protected from toxic fire-related gases, vapours and particles for at least 15 minutes while escaping.

Product Code: R59415

Description

R54915, Drager Parat 5510 Fire Escape Smoke Hood, Single Pack

Ready for escape in only 3 steps
Exceptionally innovative and intuitive: When opening the packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional tightening is required. All you have to do is: open the packaging, remove and don hood – and leave the danger zone.

Reliable protection
The high-performance combination filter reliably protects against a wide range of toxic fire-related gases, vapours and particles.The CO P2 filter is approved according to the EN standard 403:2004. In addition, the filter is tested for use against H2S (at 2500 ppm) in accordance with DIN 58647-7. Particularly convenient: The security seal on the packaging shows if the unit has been opened. In addition, the filter is tightly sealed with two filter plugs.

16 years of service life
Replacing the filter after 8 years will extend the service life of the Dräger PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or an expert training for your employees.

Sturdy and ergonomic at once
Both, ergonomics and wearing comfort were considered when designing the packaging of the Dräger PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Additionally, the robust packaging of the Dräger PARAT Escape Hoods protects the device from damage.

Different packaging types
You can select between three packaging types: The Hard Case provides splash water protection (IP54) – the Soft Pack provides dust protection (IP5) – or select the Single Pack with the standard filter plug system. Both, the Hard Case and the Soft Pack have viewing windows to check the filter expiration date and the condition of the device.

Downloads

smoke_hood_parat_5500.pdf 292 KB

Description

R54915, Drager Parat 5510 Fire Escape Smoke Hood, Single Pack

Ready for escape in only 3 steps
Exceptionally innovative and intuitive: When opening the packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional tightening is required. All you have to do is: open the packaging, remove and don hood – and leave the danger zone.

Reliable protection
The high-performance combination filter reliably protects against a wide range of toxic fire-related gases, vapours and particles.The CO P2 filter is approved according to the EN standard 403:2004. In addition, the filter is tested for use against H2S (at 2500 ppm) in accordance with DIN 58647-7. Particularly convenient: The security seal on the packaging shows if the unit has been opened. In addition, the filter is tightly sealed with two filter plugs.

16 years of service life
Replacing the filter after 8 years will extend the service life of the Dräger PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or an expert training for your employees.

Sturdy and ergonomic at once
Both, ergonomics and wearing comfort were considered when designing the packaging of the Dräger PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Additionally, the robust packaging of the Dräger PARAT Escape Hoods protects the device from damage.

Different packaging types
You can select between three packaging types: The Hard Case provides splash water protection (IP54) – the Soft Pack provides dust protection (IP5) – or select the Single Pack with the standard filter plug system. Both, the Hard Case and the Soft Pack have viewing windows to check the filter expiration date and the condition of the device.

Downloads

smoke_hood_parat_5500.pdf 292 KB

Accreditations

Newsletter

This site uses cookies. Read about our cookie policy