Home > Fire Fighting Equipment > Fire Monitors > Fixed Fire Monitors > Angus Titan LMB30 Bronze Fire Monitor

Angus Titan LMB30 Bronze Fire Monitor

Tag: Product Code: LMB30

Angus Titan LMB30 Bronze Fire Monitor

Tag:
Product Code:LMB30

£0.00

Angus Titan LMB30 Bronze Fire Monitor. Nominal Flow 3000 L/Min @ 7 bar.

The Angus LMB30 bronze fire monitor is a simple and reliable design with a hand lever for movement and hand locks in both the horizontal and vertical axis. Stainless steel ball race bearings are used for the horizontal and vertical movement.

Idea for use as Helideck Monitors

Clear

Description

The Angus LMB30 bronze fire monitor is a simple and reliable design with a hand lever for momement and hand locks in both the horizontal and vertical axis. Stainless steel ball race bearings are used for the horizontal and vertical movement.

Computer designed guide vanes cast into the body reduce turbulence and spin in the water stream lowering pressure loss and improving jet resch.

All Angus bronze monitors are based on a proven low maintenance design developed over 10 years of world-wide service.

Body materials: Bronze body to EN CC491K, equivalent to LG2, ASTM B30 and UNI 7013. Steering arm- SS316. Locking handles Duraplast on SS316 shafts.
Bearing materials: Stainless steel (SS316) ball race bearing on both axis with Viton seals rated up to 120 degrees C.
Connection: Inlet: Standard 3″ ANSI 150 FF, Outlet: 2.5″ BSP M
Operating pressure: Design pressure 16 bar. Hydraulic factory test pressure 24 bar
Weight: 23kg

Downloads

angus_lmb30_titan_monitor.pdf 661 KB

Additional Information

Nozzle Option

Angus FJ1300, Angus FJ2000, Angus FJ2800, No Nozzle

Description

The Angus LMB30 bronze fire monitor is a simple and reliable design with a hand lever for momement and hand locks in both the horizontal and vertical axis. Stainless steel ball race bearings are used for the horizontal and vertical movement.

Computer designed guide vanes cast into the body reduce turbulence and spin in the water stream lowering pressure loss and improving jet resch.

All Angus bronze monitors are based on a proven low maintenance design developed over 10 years of world-wide service.

Body materials: Bronze body to EN CC491K, equivalent to LG2, ASTM B30 and UNI 7013. Steering arm- SS316. Locking handles Duraplast on SS316 shafts.
Bearing materials: Stainless steel (SS316) ball race bearing on both axis with Viton seals rated up to 120 degrees C.
Connection: Inlet: Standard 3″ ANSI 150 FF, Outlet: 2.5″ BSP M
Operating pressure: Design pressure 16 bar. Hydraulic factory test pressure 24 bar
Weight: 23kg

Additional Information

Nozzle Option

Angus FJ1300, Angus FJ2000, Angus FJ2800, No Nozzle

Accreditations

Newsletter

This site uses cookies. Read about our cookie policy