JB18 Equipment Drying Cabinet

Tag: Product Code: JB18

JB18 Equipment Drying Cabinet

Tag:
Product Code:JB18

£0.00

Typical use: Pronomar warm air drying system with fittings for suits, lifejackets, boots, gloves or general purpose shelves.
Designed to cope with extreme environments on and offshore. It is widely used by the worlds top energy companies due to its durability.

Description

JB18 Equipment Drying Cabinet

Standard Specification
Approvals: Lloyds Register Type Test Approved
IP Rating: IP56

Dimensions mm:
Height x width x depth: 1831 x 1034 x 785
Aperture: 1583H x 812W
Internal depth mm: 704
Weight kg: 80

Material Specification
Colour: Red RAL3000
Material: Lloyds approved composites with UV Stabilised gelcoat
Pronomar Drying System: 304 Stainless Steel
Hinges and L Handle: 316 Stainless steel
Seal: EPDM seal
Reinforcement: 150mm sq pads
Lettering: “BOOT DRYING CABINET” in 75mm white

The JB18 Equipment Drying Cabinet comes fitted with the superb Pronomar stainless steel warm air drying system. This enables a wide range of wet safety or workwear to efficiently dried. The warm air system feeds air right into all parts of the clothing or gloves/boots without damaging the materials and in the most hygienic way. A wide range of fittings can be used to suit the equipment needing to be dried so please ask for details. These cabinets are manufactured using Lloyds approved composites including UV resistant gelcoats to provide long lasting protection in even the harshest environments. This is backed up with an excellent IP rating of 56 (before the fitting of the vents). It has both Lloyds and ABS approvals.

The design ensures a high level of rigidity for the relatively low weight with a very effective EPDM seal around the door aperture. The hinges are secured with 316 stainless steel nuts, bolts and washers. The door can be manufactured to be left or right hinged and is secured with 316 stainless steel 3 way locking fitted with a single handle to guarantee fast access in an emergency even when wearing gloves.

Downloads

JB18 Drying Cabinet Datasheet 490 KB

Description

JB18 Equipment Drying Cabinet

Standard Specification
Approvals: Lloyds Register Type Test Approved
IP Rating: IP56

Dimensions mm:
Height x width x depth: 1831 x 1034 x 785
Aperture: 1583H x 812W
Internal depth mm: 704
Weight kg: 80

Material Specification
Colour: Red RAL3000
Material: Lloyds approved composites with UV Stabilised gelcoat
Pronomar Drying System: 304 Stainless Steel
Hinges and L Handle: 316 Stainless steel
Seal: EPDM seal
Reinforcement: 150mm sq pads
Lettering: “BOOT DRYING CABINET” in 75mm white

The JB18 Equipment Drying Cabinet comes fitted with the superb Pronomar stainless steel warm air drying system. This enables a wide range of wet safety or workwear to efficiently dried. The warm air system feeds air right into all parts of the clothing or gloves/boots without damaging the materials and in the most hygienic way. A wide range of fittings can be used to suit the equipment needing to be dried so please ask for details. These cabinets are manufactured using Lloyds approved composites including UV resistant gelcoats to provide long lasting protection in even the harshest environments. This is backed up with an excellent IP rating of 56 (before the fitting of the vents). It has both Lloyds and ABS approvals.

The design ensures a high level of rigidity for the relatively low weight with a very effective EPDM seal around the door aperture. The hinges are secured with 316 stainless steel nuts, bolts and washers. The door can be manufactured to be left or right hinged and is secured with 316 stainless steel 3 way locking fitted with a single handle to guarantee fast access in an emergency even when wearing gloves.

Accreditations

Newsletter

This site uses cookies. Read about our cookie policy